Task and Job Setup

Procedure

 

System150 GX-45_Task:Job Setup_FIG 1

Access Job Setup screen

Before  starting this procedure, setup your software as required according to the instructions outlined in Chapter 6.

1. Select System150 GX-45_Task:Job Setup_1 to access the Job Setup screen.

 

System150 GX-45_Task:Job Setup_FIG 2

Access Job Selection screen

2. Select System150 GX-45_Task:Job Setup_2 to access the Select Job screen.

 

System150 GX-45_Task:Job Setup_FIG 3

Create a new Job file

3. Select System150 GX-45_Task:Job Setup_3 to create a new application job file.

 

System150 GX-45_Task:Job Setup_FIG 4

Enter a new job name or use generated name

4. Enter a new job name (optional) or use the generated name. Refer to Appendix E for information on the generated File Name. Refer to Appendix A, page A-9 to use the Alphanumeric keypad.
5. Select System150 GX-45_Task:Job Setup_4 to accept the name and return to the Job Setup screen.

 

System150 GX-45_Task:Job Setup_FIG 5

After Job is selected return to Guidance screen

6. Select System150 GX-45_Task:Job Setup_5 to return to the Guidance screen.

FacebookTwitterEmailShare